Submersible pump Features: Version: technopolymer crank handle . technopolymer pump body. Voltage (V): 240 50 Hz Nominal power (kW): 0,55 Max delivery height . (m): 7,4 Max flow rate . (l/h): 20 Weight: 15.25 kg Model: Motor FEKA VX 550 M-A Description: Suitable for pumping non-aggressive sewage and waste water in general with solids up to a maximum size of 50 mm. Liquid temperature range 0 °C to +35 °C for domestic applications (EN 60335-2-41), 0 °C to +50 °C for other applications Continuous operation at a liquid temperature of 35 °C and with fully submerged pump. Max. ambient temperature for pump operation with submerged motor: +40Ã' C Max. immersion depth: 10 metres Connection on the pressure side: 2" Automatic operation with a float switch Power cable: 10 metres H07RN-F, with Schuko plug Pump unit: pump casing, sealing cover, motor and protection box with stainless steel socket. Socket with insulating rubber cover. Motor shaft in AISI 316 stainless steel. Double sliding ring seal with intermediate oil chamber (non-toxic oil) in carbon/ceramic on motor side and silicon carbide/silicon carbide on pump side. Motor unit: dry-running sealed asynchronous motor, cooled by pumped liquid. The rotor is mounted on continuously lubricated huge ball bearings for quiet operation and long service life. Heat and voltage protection as standard. Capacitor with permanent operation Design in accordance with IEC 2-3 - IEC 61-69 (EN 60335-2-41). Type of motor protection : IP 68 Insulation class : F Installation : fixed or portable, in vertical position. Code : 26070337