TOSASIEPI ACTIVE MTP 1500 TECHNICAL DATA SHEET - SPECIFICATIONS Type: Active 2 Stroke Displacement: 28.5 CC Power (Kw/Hp): 1.25/1.7 Carburettor: Walbro WYC Ignition: Electronic Air Filter: Single - DIMENSIONS AND WEIGHT: Rod diameter (Ø mm): 26 Rod thickness (mm): 1.5 Weight (Kg): 6.2 Tank capacity (Lt.): 0. 50 Total length (mm): 2150 - BLADE: Length (mm): 480 Actual cut (mm): 470 Pitch (mm): 35 Type: Chrome vanadium double with 2-sided cut - OTHER CHARACTERISTICS: Clutch (Ø mm): 54 Blade with 7 rotation positions - Carburettor Walbro carburettor with first-rate diaphragm with primer for immediate ignition. Mylar diaphragms resist unleaded petrol even with a high percentage of alcohol and alkylated petrol, maintaining flexibility over time. - DOUBLE INSULATION SYSTEM consisting of four springs and plastic dampers. Total hand isolation from the engine and cutting apparatus. - Transmission With maximum constructional solidity of all its components, the mechanism and connecting rods are mounted on bearings. The aluminium gearbox cover is secured with 6 robust fasteners. Steel connecting rods with needle rollers for smooth movement and durability. - Transparent fuel tank for an immediate check of the fuel level, new wider and sturdier cap for comfortable use and a perfect seal. RUBBER and PIPPETS made of Viton, a material resistant to unleaded petrol and high temperatures. EXHAUST designed to avoid the Vapor - Lock phenomenon. - blades in Cr-V This special alloy gives greater hardness and resistance to breakage; the blades remain sharp even in the presence of iron wires in the hedge. - Crankshaft Made of case-hardened steel, fitted with a silver-plated roller cage for racing engines in the large displacements. Hyper-lightweight piston for minimum vibration with 2 special cast iron piston rings for superior durability. Engines designed for high torque even at low revs. - Oil-bath sponge filter This type of filter allows significantly better performance and lower maintenance costs than paper filters. - Blade machining The blades are laser-cut and are also ground through a precision grinding process. The perfect fit of the blades is guaranteed by special calibrated pads. - Blade geometry ACTIVE technology has enabled the design of blades with refined and innovative geometry. The result is optimal cutting angles. ACTIVE Original part number: 1602802 CZ